Using the IRLP Link From W1GZ: Notice!! no tail or beep, this a requirement. Remember to pause, listen and pause again To Connect: o Listen to be sure the frequency is clear o Key up W1GZ repeater, announce your id and that you are bringing up the link, e.g.; "YOUR CALL  connecting", then pause o Enter C, 0, * (i.e., "C+ 0+ star"), un-key and wait for response o Enter C, 1, * (i.e., "C+ 1+ star"), un-key and wait for response for 9122 o Enter the requested node's four digit code, e.g.; 9123/ 9127 connects to the New-Eng gateway o Pause for 10 seconds, then announce your call; e.g.;  "your call listening" To Disconnect: o Enter 73 (i.e., " just 73") Notice!! no tail or beep, this a requirement